Rhino - 1 L MFC Blue Daily Milk Cleaner - E14005-1

A high-performance alkaline milk line cleaner designed for machines used at a high frequency. Recommended for use with acidic milk frother cleaner or descaler through the milk lines periodically to remove any scale build-up in the lines. Safe for all machine parts, MFC Blue is listed with NSF. It has been tested, evaluated and has passed the most stringent toxicology and corrosivity standards. The ingredients and formulation of the products that are NSF certified are safe for use, leave no harmful residues and do not cause corrosion within the coffee machine. Provides excellent milk fat removal along with descaling of automatic milk frothers. MFC Blue also leaves no trace of odour after rinsing.

Independent laboratory testing shows Cafetto MFC Blue kills 99.999% of E-Coli, Salmonella, Listeria and Enterococcus when used in accordance with instructions.

Safe for all machine parts, MFC Blue is listed with NSF. It has been tested, evaluated and passed the most stringent toxicology and corrosivity standards. The ingredients and formulation of the products that are NSF certified are safe, leave no harmful residues and do not cause corrosion within the coffee machine.

1. Ensure the white cap is tightly sealed and slightly loosen the blue cap. Gently squeeze the bottle until the reservoir measures 50ml, remove the blue cap and pour from the reservoir
2. Add 50ml of MFC Blue to 1 liter of warm water in a cleaning container. Ensure you replace the blue cap and seal tightly after pouring the required dose
3. Insert milk frother suction tube into solution
4. Run entire solution through frother
5. Repeat the above procedure with 1 liter of clean water to rinse all the components thoroughly
6. Do not mix with other chemicals

1. Ensure the white cap is tightly sealed and slightly loosen the blue cap
2. Gently squeeze the bottle until reservoir measures 50ml, remove the blue cap and pour from reservoir
3. Add 50ml of MFC Blue to 500ml of warm water in a cleaning container
4. Ensure you replace the blue cap and seal tightly after pouring the required dose
5. Add the actuator plate to the container and soak for 5 minutes
6. Dip a cloth in the solution and wipe over rinser sink and grate
7. Pour the remaining solution into the rinser sink, rinse with fresh water, and reassemble